Post Offer Free
China Non Stick Coating Online Market  

Gold Index: 7500

You are here: home  > Two Component 281 Standard Drying Car Paint Hardener For Varnish / Thinner

Two Component 281 Standard Drying Car Paint Hardener For Varnish / Thinner 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: 1 liter2.5 liter4 liter5 li...

 
 
Two Component 281 Sta

 

 

Two Component 281 Standard Drying Car Paint Hardener For Varnish / Thinner

 

 

Quick Detail:

 

Product Type

281 standard curing agent is a series of two-component isocyanate hardener, it will not only improve the composition of high-density coverage, while also reducing the volatile solvent comply with increasingly stringent environmental laws, providing a more stable gloss finish , and the hardness is better.

Purpose

With two-component paint, varnish, thinner, and promote rapid drying paint, and paint adhesion strength increases gloss paint to improve chemical stability, corrosion resistance.

Substrate

With two-component paint or varnish construction and polished, completely dry, in good condition original paint, old paint and other surface and intermediate paint, both big area painting, but also can quickly spot repair. Repair of small and medium size advantage is particularly prominent, is the preferred high-efficiency varnish coating and essential products. .

Mixing Ratio

Component paint or  Clear Coat 100parts

281 Standard Drying Hardener 50parts

Thinner 10-20parts

Notice

1, read the instructions before construction;

2, with the former the paint and hardener ratio adjusted as required, how much with how much Stir used within 6 hours run out;

3, the construction process to keep dry and clean, non-contact with water, acids, alcohols, bases, etc.; rear drums with paint hardener must Gaiyan avoid jelly scrapped;

4, during the construction and dry, shall not be greater than 85% relative humidity,

Shelf Life

18months if stored in its original sealed cans at 20

Packing

1liter ,2.5liter, 4liter or 5 liter  can

 

Performance:

Standard high-solids drying agent for the local repair at room temperature and the whole car spraying.

 

Precautions:

(1) Select the type of curing agent according to the temperature, humidity and drying conditions, under normal circumstances, the following selection criteria 18 -30 curing agent.

(2) A curing agent for water are more sensitive, prone to rise after absorbing water tank and solidification phenomena, So hardener cans after use, if not yet exhausted, reclosable lid should be sealed and stored in a cool place otherwise, easy to consistency. Under normal circumstances hardener should avoid storing in direct sunlight conditions.

(3) When spraying to make appropriate personal protective treatment, such as with a gas mask, etc., as a curing agent for the respiratory system and mucous membrane irritant.

 

bigPhoto
 Mr. Steven Zhang

Tel: 86-755-27214693
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

China Non Stick Coating Online Market [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (156)