Fast Drying 2K Acrylic Auto Paint 1 liter3.75 liter5 liter18-20 liter manufacturer from China China Non Stick Coating Online Market

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 1 liter3.75 liter5 liter18-...

Fast Drying 2K Topcoat for Business Car with Acrylic Polyurethane Paint

Fast Drying 2K Topcoat for Business Car with Acrylic Polyurethane Paint

2K Topcoat, B204 International Black, A high strength black with blue shade.

Quick Detail:

Product Type	Single-step series of two-component paint pigment concentration with a hardener and thinners, after construction was a bright light and can withstand strong finish
Purpose	Polished, completely dry, in good condition original paint, old paint surface and intermediate paint surface.
Substrate	The old paint and all kinds of mediun paint,primer is surface have been hardened and abraded Sand with 600-800#grit paper wet or 400-600# grit paper dry
Mixing Ratio	B203 International Black 100parts 281 Standard Drying Hardener 50parts Thinner 10-20parts
Notice	1, read the instructions before construction; 2, with the former the paint and hardener ratio adjusted as required, how much with how much Stir used within 6 hours run out; 3, the construction process to keep dry and clean, non-contact with water, acids, alcohols, bases, etc.; rear drums with paint hardener must Gaiyan avoid jelly scrapped; 4, during the construction and dry, shall not be greater than 85% relative humidity,
Shelf Life	18months if stored in its original sealed cans at 20
Packing	1liter , 3.75liter or 5 liter can

Description:

This high quality 2K acrylic solid-colour paint is designed for high-grade sedan and business car. It’s specially used in the low temperature coating line of top-paint coating and mending. It features high gloss, high hardness and full paint film. Easy to apply, it is durable and won’t fade easily.Second masterbatch cost-effective.

Specifications:

Viscosity : 130150S (spray-4 cups)/ 25

Ingredients: hydroxy acrylic resin, pigment, auxiliary agent, solvent.

Colour: 2K one coat, all kinds of autobodies, full colour range, colours can be customized.

Application Details:

(1) Application Primer

Remove the oil and grease away from the old paint or original paint. Apply HUATONG middle-coating baking paint and buff it with 600-800-sieve wet sand paper and then blow it dry. Otherwise, any water content left in the pits would affect the quality of the paint.

(2) Application Content:

Mixing Proportion: solid-colour paint : hardener: thinner=2: 1: 0.8~1 (Make a proper thinner proportion according to different temperatures)

Spray Viscosity: 17S(spray-4 cups)/25

Dilution: Add in 20-50% thinner according to the temperature (For local repairs, use the standard or quick-dry hardener or thinner; for whole car coating, use the standard and slow-dry thinner according to the termperature).

Hours of Use: approx. 6 hours at 25, (use 2K standard hardener);

Spray Pressure:4-5 Pa ;

Nozzle Diameter: gravity type 1.2~1.5mm

Suction type 1.4-1.6mm

Spray Method: Apply 2-3 coats to get a 45~60μm;

Waiting Interval: Adjust spray intervals according to the temperature. The interval takes 10-15 minutes at 20. After all sprays, wait 15-20 minutes before baking.

Tool Cleanings: Clean the tools with the thinner shortly after use.

Drying Time: 8 hours at 25, air dry needs 3 days to get cured completely, if baking at 80 for 30 minutes or baking at 70 for 45 minutes, then it needs 90 minutes to get cured completely.

(3) Reapply: For the treatment of small grains and sagging, buff them with 2000-grit sand paper after they’re completely cured and then polish them with polish wax.

Precautionss:

Add tie water in the proportion of 1: 1 into the paint left beind inside the junctions and spray gun and then spray the paint to the junctions.

As the two-component top coat woul